Steel Siding & Hand Hewn Log Siding in Rock Springs, Wyoming

Home / Locations / Wyoming / Rock Springs

Steel Siding Is The Best Solution For The Rock Springs, Wyoming Area

Sweetwater County carries a 3 out of 5 hail severity rating from NOAA, and homeowners in Rock Springs, Wyoming choosing steel siding for the exterior wall need a panel construction that addresses what that rating means when a spring storm system actually arrives. Class 4 impact resistance is the highest rating available for exterior siding panels. The 26-gauge steel face holds surface integrity under direct hail strike without cracking or denting. At approximately 25% thicker than 29-gauge panels, it resists deformation where thinner steel does not. Permanently bonded behind that steel face, the EPS foam core absorbs the energy of each hail strike at the backing layer before the force transfers to the wall behind it. That EPS foam core runs through the cold season first. Through Rock Springs's winters, no moisture enters the foam core through cold-season freeze-thaw cycling, regardless of the winter's depth. The panel exits winter in full structural condition. Spring convective storms arrive to find the same panel that held through all of that. Class 4 rated face. EPS foam backing fully intact. No pre-existing panel vulnerabilities from the cold season. Class 4 rated products can qualify homeowners for reduced insurance premiums. Check with your provider on the specific terms applicable in this part of Wyoming. After hail season, the same Class A rated, non-combustible panel carries no organic material into fire season. Steel and EPS foam have no wood fiber, no cellulose, and no organic binder. Wood grain siding and hand hewn log siding with chinking both come on that permanently non-combustible construction, available for homeowners in this terrain who want the log and mountain lodge aesthetic on a panel built to hold through every season it faces. Class 4 rated for the spring. Class A rated for the rest of the year.

SteeLuxee Hand Hewn Log Steel Siding On a Small Cabin Style Home
Request a Free Estimate

The Most Advanced Steel Siding On The Market

Available in 50 Solid Colors and 22 Wood Patterns
SteeLuxe Steel Siding Close Up Graphic
EPS Foam
Class-A Fire Rating
Sound Dampending
R-3.57 Insulation
Premium 7 Step Coating
Heavy Duty 26 Guage Steel
  • 20 Year Fading & Chalking Warranty
  • 50 Year Flaking & Peeling Warranty
  • Lasts 40-60+ Years
  • One Person Installation
SteeLuxe Panel Joint Closeup Graphic
Slide Lock Panel System
SteeLuxe Steel Siding On Roof Support

The Most Advanced Steel Siding in Rock Springs

50 Solid Colors & 22 Wood Grain Patterns

SteeLuxe is a family-owned steel siding manufacturer that builds one product and builds it right. Every panel is made from 26-gauge steel, about 25% thicker than the 29-gauge steel that most competitors use. Each panel is bonded to an EPS foam core that adds R-3.57 insulation value, sound dampening, and enough panel rigidity so that one person can carry and install it without help.

The finish on every panel goes through a proprietary 7-step coating process using Kynar 500 for wood grain patterns and Sherwin-Williams WeatherXL for solid colors. These are the top-tier coatings in the metal siding industry. The surface resists fading, chalking, scratching, and corrosion for decades without the need for repainting or resealing.

Rock Springs homeowners can choose from 50 solid colors or 22 wood grain patterns. The wood grain options use a 3D printed finish that gives each panel genuine visual depth and a realistic wood appearance with zero wood maintenance. Every profile installs with SteeLuxe’s proprietary Slide-Lock panel system, designed by siding installers with 25 years of field experience. Panels lock together cleanly and consistently, reducing installation time and alignment issues.

SteeLuxe steel siding carries a Class A fire rating and Class 4 impact resistance, the highest ratings available. It is built to last 40 to 60 years or more.

Need help finding an installer?

Find a SteeLuxe dealer near you

The Only Steel Hand-Hewn Log Cabin Siding with Chinking

Available in Rock Springs, Wyoming

SteeLuxe makes the only steel siding on the market with a true hand-hewn timber profile and an optional standalone chinking panel. If you want the log cabin look on your home, this is the only steel product built to deliver with this level of detail.

Each panel features a realistic 3D printed hand-hewn surface pattern that replicates the irregular axe marks, natural knots, and rugged grain character of authentic pioneer-era log construction. The wood grain patterns are non-repeating, so no two panels look identical. Between each course, a separate steel chinking profile panel is installed to recreate the classic chinked log cabin appearance. The chinking panel is available in four colors — Ash Gray, Charcoal, Clay, and Sandstone Tan,  so Rock Springs homeowners can match or contrast it to suit the look they want.

This is not a printed chink line on the face of the siding panel. It is a separate steel panel made from the same 26-gauge steel and 7-step Kynar 500 coating as every other SteeLuxe panel. It will not crack, separate, fade, or require reapplication.

Real hand-hewn wood siding demands re-staining and re-sealing every two to three years, chinking inspection and repair every season, and ongoing insect and rot prevention. SteeLuxe steel hand-hewn siding requires none of that. No staining. No sealing. No chinking repairs. The same 50-year peeling and flaking warranty and 20-year fade and chalking warranty that covers every SteeLuxe panel covers this one, too.

SteeLuxe hand-hewn and chinking siding works on full home re-siding projects, new construction, barndominiums, cabins, vacation rentals, and accent walls. It installs with the same Slide-Lock panel system as every other SteeLuxe profile which is fast, clean, and manageable for one person.

SteeLuxe steel Siding On House

Ready to Transform Your Home With Hand-Hewn Log Cabin Siding?

Get the authentic hand-hewn cabin look with the chinking detail you love,  and never think about maintenance again. SteeLuxe steel siding is insulated, fire-rated, hail-resistant, and built to last a lifetime. See it and feel it for yourself.

Request a Free Estimate

Frequently Asked Questions

Q:Is steel siding worth the cost compared to vinyl or fiber cement?

A:Steel siding costs more upfront than vinyl and is comparable to fiber cement depending on the profile and finish. The value case comes from lifespan and maintenance. Vinyl typically lasts 20 to 30 years and requires periodic cleaning, painting, and panel replacement after impact events. Fiber cement requires repainting every 5 to 7 years and can crack under hail and impact. SteeLuxe steel siding is built to last 40 to 60 years or more with no repainting, no resealing, and no panel replacement after normal weather events. Over a 40-year period the total cost of ownership for steel siding is typically lower than vinyl or fiber cement when maintenance and replacement costs are factored in.

Q:Does steel siding actually look like real wood?

A:SteeLuxe steel siding is available in 22 wood grain patterns using a 3D printed finish that replicates the look of real wood on a flat steel panel. The patterns include options that replicate cedar, barnwood, and hand hewn timber. The hand hewn log siding with chinking option replicates the irregular axe marks and grain character of authentic hand hewn timber with a separate steel chinking panel installed between courses. The finish is printed, not pressed, so the panel surface is flat and consistent. It does not fade, peel, or require the staining and sealing that real wood demands.

Q:How long does steel siding last?

A:SteeLuxe steel siding is built to last 40 to 60 years or more. The 26-gauge steel core does not rot, warp, crack, or absorb moisture. The 7-step coating process using Kynar 500 and Sherwin Williams WeatherXL protects the finish from fading, chalking, and corrosion for decades. Every panel is backed by a 50-year peeling and flaking warranty and a 20-year fade and chalking warranty. Most homeowners who install SteeLuxe are installing siding for the last time.

Q:Is SteeLuxe steel siding available in Rock Springs, Wyoming

A:Yes. SteeLuxe steel siding is available to homeowners in Rock Springs, Wyoming and throughout the surrounding Sweetwater County. SteeLuxe panels are manufactured in New Philadelphia, Ohio and ship to contractors and homeowners across the country. The full line includes 50 solid colors and 22 wood grain patterns including hand hewn log siding with chinking. Contact SteeLuxe directly for availability, pricing, and to find an installer in the Rock Springs area.

Q:We're in a moderate wildfire area, not high. Is Class A still worth it?

A:Class A fire rating is worth specifying regardless of whether the wildfire risk rating is moderate or high. Rock Springs is located in a region rated Moderate wildfire risk by the USDA Forest Service, and risk ratings can change as conditions shift over the life of a home. Non-combustible Class A rated siding removes ember ignition as a risk factor from the exterior wall entirely. It also can qualify Rock Springs homeowners for reduced insurance premiums in fire-risk zones regardless of whether the rating is moderate or high. Check with your insurance provider. Beyond the insurance question, a 40 to 60-year siding product installed today will be on the home through whatever risk conditions the next several decades bring to Wyoming.

Q:How thick does hail need to be before it actually marks 26-gauge steel siding?

A:Class 4 impact resistance, the rating SteeLuxe carries, requires the panel to withstand impact from a 2-inch steel ball without cracking or penetrating the face. In hail terms that corresponds to approximately 2-inch diameter hail, roughly golf ball size. Rock Springs sits in an area rated 3 out of 5 for hail severity by NOAA. The 26-gauge steel face is about 25% thicker than the 29-gauge steel many competing products use, and the EPS foam core behind it absorbs additional impact energy. Hail in the common range that Sweetwater County sees in a typical severe weather season falls well below the threshold where visible marking on a Class 4 rated 26-gauge panel is likely.

Q:What is the difference between steel siding and vinyl siding?

A:Steel and vinyl are both low-maintenance siding options but they perform very differently over time. Vinyl expands and contracts significantly in temperature extremes and can warp, crack, and fade over 20 to 30 years. Steel does not warp, crack, or fade at the same rate. SteeLuxe uses 26-gauge steel, about 25% thicker than standard 29-gauge steel, bonded to an EPS foam core that adds R-3.57 insulation value. Vinyl has no insulation value on its own. Steel carries a Class A fire rating and Class 4 impact resistance. Vinyl carries neither. The primary advantage of vinyl is lower upfront cost. The primary advantages of steel are lifespan, impact resistance, fire rating, and long-term finish performance.

Areas Near Rock Springs We Serve

SteeLuxe ships direct to Rock Springs and the surrounding area. We also serve:

Afton, WY Alpine, WY Arapahoe, WY Bear River, WY Diamondville, WY Evanston, WY Green River, WY Jackson, WY Kemmerer, WY La Barge, WY Lander, WY Lyman, WY Marbleton, WY North Rock Springs, WY Osmond, WY Pinedale, WY