Steel Siding & Hand Hewn Log Siding in Salem, New Hampshire

Home / Locations / New Hampshire / Salem

Steel Siding Is The Best Solution For The Salem, New Hampshire Area

Salem, New Hampshire gets genuine winter, with average lows around 8 degrees F, and choosing steel siding here means stepping off the maintenance cycle for good. Humidity runs high through the warmer months too. Both conditions are handled by the same panel. SteeLuxe uses 26-gauge steel bonded to an EPS foam core. Steel does not absorb moisture through the panel face, along cut edges, or around fastener points. The Slide-Lock system keeps air moving behind the siding so moisture at the wall plane dries out. The EPS foam core holds its R-3.57 insulation value through decades of temperature cycling without compression or degradation. Finish options run to 50 solid colors in Sherwin Williams WeatherXL or 22 wood grain siding patterns finished with Kynar 500. The hand hewn log siding with chinking option pairs the main panel with a steel chinking strip between each course, available in Ash Gray, Charcoal, Clay, or Sandstone Tan. Every panel carries a 50-year peeling and flaking warranty and a 20-year fade and chalking warranty. The maintenance schedule for SteeLuxe steel siding is straightforward. There is not one.

SteeLuxee Hand Hewn Log Steel Siding On a Small Cabin Style Home
Request a Free Estimate

The Most Advanced Steel Siding On The Market

Available in 50 Solid Colors and 22 Wood Patterns
SteeLuxe Steel Siding Close Up Graphic
EPS Foam
Class-A Fire Rating
Sound Dampending
R-3.57 Insulation
Premium 7 Step Coating
Heavy Duty 26 Guage Steel
  • 20 Year Fading & Chalking Warranty
  • 50 Year Flaking & Peeling Warranty
  • Lasts 40-60+ Years
  • One Person Installation
SteeLuxe Panel Joint Closeup Graphic
Slide Lock Panel System
SteeLuxe Steel Siding On Roof Support

The Most Advanced Steel Siding in Salem

50 Solid Colors & 22 Wood Grain Patterns

SteeLuxe is a family-owned steel siding manufacturer that builds one product and builds it right. Every panel is made from 26-gauge steel, about 25% thicker than the 29-gauge steel that most competitors use. Each panel is bonded to an EPS foam core that adds R-3.57 insulation value, sound dampening, and enough panel rigidity so that one person can carry and install it without help.

The finish on every panel goes through a proprietary 7-step coating process using Kynar 500 for wood grain patterns and Sherwin-Williams WeatherXL for solid colors. These are the top-tier coatings in the metal siding industry. The surface resists fading, chalking, scratching, and corrosion for decades without the need for repainting or resealing.

Salem homeowners can choose from 50 solid colors or 22 wood grain patterns. The wood grain options use a 3D printed finish that gives each panel genuine visual depth and a realistic wood appearance with zero wood maintenance. Every profile installs with SteeLuxe’s proprietary Slide-Lock panel system, designed by siding installers with 25 years of field experience. Panels lock together cleanly and consistently, reducing installation time and alignment issues.

SteeLuxe steel siding carries a Class A fire rating and Class 4 impact resistance, the highest ratings available. It is built to last 40 to 60 years or more.

Need help finding an installer?

Find a SteeLuxe dealer near you

The Only Steel Hand-Hewn Log Cabin Siding with Chinking

Available in Salem, New Hampshire

SteeLuxe makes the only steel siding on the market with a true hand-hewn timber profile and an optional standalone chinking panel. If you want the log cabin look on your home, this is the only steel product built to deliver with this level of detail.

Each panel features a realistic 3D printed hand-hewn surface pattern that replicates the irregular axe marks, natural knots, and rugged grain character of authentic pioneer-era log construction. The wood grain patterns are non-repeating, so no two panels look identical. Between each course, a separate steel chinking profile panel is installed to recreate the classic chinked log cabin appearance. The chinking panel is available in four colors — Ash Gray, Charcoal, Clay, and Sandstone Tan,  so Salem homeowners can match or contrast it to suit the look they want.

This is not a printed chink line on the face of the siding panel. It is a separate steel panel made from the same 26-gauge steel and 7-step Kynar 500 coating as every other SteeLuxe panel. It will not crack, separate, fade, or require reapplication.

Real hand-hewn wood siding demands re-staining and re-sealing every two to three years, chinking inspection and repair every season, and ongoing insect and rot prevention. SteeLuxe steel hand-hewn siding requires none of that. No staining. No sealing. No chinking repairs. The same 50-year peeling and flaking warranty and 20-year fade and chalking warranty that covers every SteeLuxe panel covers this one, too.

SteeLuxe hand-hewn and chinking siding works on full home re-siding projects, new construction, barndominiums, cabins, vacation rentals, and accent walls. It installs with the same Slide-Lock panel system as every other SteeLuxe profile which is fast, clean, and manageable for one person.

SteeLuxe steel Siding On House

Ready to Transform Your Home With Hand-Hewn Log Cabin Siding?

Get the authentic hand-hewn cabin look with the chinking detail you love,  and never think about maintenance again. SteeLuxe steel siding is insulated, fire-rated, hail-resistant, and built to last a lifetime. See it and feel it for yourself.

Request a Free Estimate

Frequently Asked Questions

Q:Is steel siding worth the cost compared to vinyl or fiber cement?

A:Steel siding costs more upfront than vinyl and is comparable to fiber cement depending on the profile and finish. The value case comes from lifespan and maintenance. Vinyl typically lasts 20 to 30 years and requires periodic cleaning, painting, and panel replacement after impact events. Fiber cement requires repainting every 5 to 7 years and can crack under hail and impact. SteeLuxe steel siding is built to last 40 to 60 years or more with no repainting, no resealing, and no panel replacement after normal weather events. Over a 40-year period the total cost of ownership for steel siding is typically lower than vinyl or fiber cement when maintenance and replacement costs are factored in.

Q:Does steel siding actually look like real wood?

A:SteeLuxe steel siding is available in 22 wood grain patterns using a 3D printed finish that replicates the look of real wood on a flat steel panel. The patterns include options that replicate cedar, barnwood, and hand hewn timber. The hand hewn log siding with chinking option replicates the irregular axe marks and grain character of authentic hand hewn timber with a separate steel chinking panel installed between courses. The finish is printed, not pressed, so the panel surface is flat and consistent. It does not fade, peel, or require the staining and sealing that real wood demands.

Q:How long does steel siding last?

A:SteeLuxe steel siding is built to last 40 to 60 years or more. The 26-gauge steel core does not rot, warp, crack, or absorb moisture. The 7-step coating process using Kynar 500 and Sherwin Williams WeatherXL protects the finish from fading, chalking, and corrosion for decades. Every panel is backed by a 50-year peeling and flaking warranty and a 20-year fade and chalking warranty. Most homeowners who install SteeLuxe are installing siding for the last time.

Q:Is SteeLuxe steel siding available in Salem, New Hampshire

A:Yes. SteeLuxe steel siding is available to homeowners in Salem, New Hampshire and throughout the surrounding Southern New Hampshire. SteeLuxe panels are manufactured in New Philadelphia, Ohio and ship to contractors and homeowners across the country. The full line includes 50 solid colors and 22 wood grain patterns including hand hewn log siding with chinking. Contact SteeLuxe directly for availability, pricing, and to find an installer in the Salem area.

Q:Will ice damming behind steel siding affect the wall sheathing underneath?

A:Steel siding does not create conditions that allow water to accumulate and freeze behind the panels against the wall sheathing. SteeLuxe panels do not absorb moisture through the face, cut edges, or around fastener points. The Slide-Lock panel system keeps air circulating behind the siding so any moisture that reaches the wall plane dries out rather than sitting trapped against the sheathing. In Salem, where winters regularly drop to 8 degrees F, that drainage and airflow design matters. The EPS foam core maintains its R-3.57 insulation value permanently through repeated freeze-thaw cycles without compressing or separating. The panel system is built to manage moisture at the wall level, not concentrate it.

Q:Will mold or mildew grow on the face of steel siding in a high-humidity environment?

A:Mold and mildew will not grow on the face of SteeLuxe steel siding, even in a climate like Salem's where humidity runs consistently high. Mold requires a moist organic surface to establish itself. The 7-step coating process produces a sealed, non-porous face that provides no foothold, and steel does not absorb the surface moisture that wood and fiber cement hold in New Hampshire's conditions. Behind the panels, the EPS foam core is non-organic and does not support mold or mildew growth. The Slide-Lock system keeps air moving behind the siding so moisture dries rather than sitting against any surface in the wall assembly. High humidity does not change any of that.

Q:What is the difference between steel siding and vinyl siding?

A:Steel and vinyl are both low-maintenance siding options but they perform very differently over time. Vinyl expands and contracts significantly in temperature extremes and can warp, crack, and fade over 20 to 30 years. Steel does not warp, crack, or fade at the same rate. SteeLuxe uses 26-gauge steel, about 25% thicker than standard 29-gauge steel, bonded to an EPS foam core that adds R-3.57 insulation value. Vinyl has no insulation value on its own. Steel carries a Class A fire rating and Class 4 impact resistance. Vinyl carries neither. The primary advantage of vinyl is lower upfront cost. The primary advantages of steel are lifespan, impact resistance, fire rating, and long-term finish performance.

Areas Near Salem We Serve

SteeLuxe ships direct to Salem and the surrounding area. We also serve:

Atkinson, NH Bradford, NH Center Ossipee, NH Dublin, NH Gorham, NH Hampton Beach, NH Hampton Falls, NH Jefferson, NH Madison, NH Newington, NH Newton, NH Plaistow, NH Rollinsford, NH South Hampton, NH Stoddard, NH Tuftonboro, NH Windham, NH