Steel Siding & Hand Hewn Log Siding in Terrytown, Louisiana

Home / Locations / Louisiana / Terrytown

Steel Siding Is The Best Solution For The Terrytown, Louisiana Area

In Terrytown, Louisiana, the wood grain siding line for steel siding runs to 22 patterns, all finished with Kynar 500 on a coating built for what Gulf Coast conditions put against an exterior surface each year. Kynar 500 is rated for UV resistance in sustained high-temperature environments. Colors hold without chalking or fading through the long summer season. Terrytown sits in one of the most consistently humid regions in the continental United States. Kynar 500 holds adhesion through extreme sustained ambient moisture pressing against the panel face alongside the UV load. No blistering occurs even as both surface stresses run simultaneously for months. Real wood in this climate demands periodic re-staining and sealing. None of that applies to Kynar 500-coated steel. The 3D printed finish replicates the depth of cedar, barnwood, and hand hewn timber on a flat steel face that takes on no ambient moisture and requires no surface treatment across the 40 to 60 year lifespan. Hand hewn log siding with chinking takes the profile to its most detailed expression, with a separate steel chinking strip in Ash Gray, Charcoal, Clay, or Sandstone Tan installed between courses. The USDA classifies this region of Louisiana as Very Heavy for termite pressure, the highest category in the system. The wood-look finish sits on a panel with zero organic material. Termites operating at the highest USDA pressure classification find nothing to consume in the construction. Terrytown falls within FEMA's hurricane-prone designation for this part of Louisiana, and 26-gauge steel holds structurally under storm-force wind loads each season. The 20-year fade and chalking warranty is the finish guarantee built for Gulf Coast surface demands.

SteeLuxee Hand Hewn Log Steel Siding On a Small Cabin Style Home
Request a Free Estimate

The Most Advanced Steel Siding On The Market

Available in 50 Solid Colors and 22 Wood Patterns
SteeLuxe Steel Siding Close Up Graphic
EPS Foam
Class-A Fire Rating
Sound Dampending
R-3.57 Insulation
Premium 7 Step Coating
Heavy Duty 26 Guage Steel
  • 20 Year Fading & Chalking Warranty
  • 50 Year Flaking & Peeling Warranty
  • Lasts 40-60+ Years
  • One Person Installation
SteeLuxe Panel Joint Closeup Graphic
Slide Lock Panel System
SteeLuxe Steel Siding On Roof Support

The Most Advanced Steel Siding in Terrytown

50 Solid Colors & 22 Wood Grain Patterns

SteeLuxe is a family-owned steel siding manufacturer that builds one product and builds it right. Every panel is made from 26-gauge steel, about 25% thicker than the 29-gauge steel that most competitors use. Each panel is bonded to an EPS foam core that adds R-3.57 insulation value, sound dampening, and enough panel rigidity so that one person can carry and install it without help.

The finish on every panel goes through a proprietary 7-step coating process using Kynar 500 for wood grain patterns and Sherwin-Williams WeatherXL for solid colors. These are the top-tier coatings in the metal siding industry. The surface resists fading, chalking, scratching, and corrosion for decades without the need for repainting or resealing.

Terrytown homeowners can choose from 50 solid colors or 22 wood grain patterns. The wood grain options use a 3D printed finish that gives each panel genuine visual depth and a realistic wood appearance with zero wood maintenance. Every profile installs with SteeLuxe’s proprietary Slide-Lock panel system, designed by siding installers with 25 years of field experience. Panels lock together cleanly and consistently, reducing installation time and alignment issues.

SteeLuxe steel siding carries a Class A fire rating and Class 4 impact resistance, the highest ratings available. It is built to last 40 to 60 years or more.

Need help finding an installer?

Find a SteeLuxe dealer near you

The Only Steel Hand-Hewn Log Cabin Siding with Chinking

Available in Terrytown, Louisiana

SteeLuxe makes the only steel siding on the market with a true hand-hewn timber profile and an optional standalone chinking panel. If you want the log cabin look on your home, this is the only steel product built to deliver with this level of detail.

Each panel features a realistic 3D printed hand-hewn surface pattern that replicates the irregular axe marks, natural knots, and rugged grain character of authentic pioneer-era log construction. The wood grain patterns are non-repeating, so no two panels look identical. Between each course, a separate steel chinking profile panel is installed to recreate the classic chinked log cabin appearance. The chinking panel is available in four colors — Ash Gray, Charcoal, Clay, and Sandstone Tan,  so Terrytown homeowners can match or contrast it to suit the look they want.

This is not a printed chink line on the face of the siding panel. It is a separate steel panel made from the same 26-gauge steel and 7-step Kynar 500 coating as every other SteeLuxe panel. It will not crack, separate, fade, or require reapplication.

Real hand-hewn wood siding demands re-staining and re-sealing every two to three years, chinking inspection and repair every season, and ongoing insect and rot prevention. SteeLuxe steel hand-hewn siding requires none of that. No staining. No sealing. No chinking repairs. The same 50-year peeling and flaking warranty and 20-year fade and chalking warranty that covers every SteeLuxe panel covers this one, too.

SteeLuxe hand-hewn and chinking siding works on full home re-siding projects, new construction, barndominiums, cabins, vacation rentals, and accent walls. It installs with the same Slide-Lock panel system as every other SteeLuxe profile which is fast, clean, and manageable for one person.

SteeLuxe steel Siding On House

Ready to Transform Your Home With Hand-Hewn Log Cabin Siding?

Get the authentic hand-hewn cabin look with the chinking detail you love,  and never think about maintenance again. SteeLuxe steel siding is insulated, fire-rated, hail-resistant, and built to last a lifetime. See it and feel it for yourself.

Request a Free Estimate

Frequently Asked Questions

Q:Is steel siding worth the cost compared to vinyl or fiber cement?

A:Steel siding costs more upfront than vinyl and is comparable to fiber cement depending on the profile and finish. The value case comes from lifespan and maintenance. Vinyl typically lasts 20 to 30 years and requires periodic cleaning, painting, and panel replacement after impact events. Fiber cement requires repainting every 5 to 7 years and can crack under hail and impact. SteeLuxe steel siding is built to last 40 to 60 years or more with no repainting, no resealing, and no panel replacement after normal weather events. Over a 40-year period the total cost of ownership for steel siding is typically lower than vinyl or fiber cement when maintenance and replacement costs are factored in.

Q:Does steel siding actually look like real wood?

A:SteeLuxe steel siding is available in 22 wood grain patterns using a 3D printed finish that replicates the look of real wood on a flat steel panel. The patterns include options that replicate cedar, barnwood, and hand hewn timber. The hand hewn log siding with chinking option replicates the irregular axe marks and grain character of authentic hand hewn timber with a separate steel chinking panel installed between courses. The finish is printed, not pressed, so the panel surface is flat and consistent. It does not fade, peel, or require the staining and sealing that real wood demands.

Q:How long does steel siding last?

A:SteeLuxe steel siding is built to last 40 to 60 years or more. The 26-gauge steel core does not rot, warp, crack, or absorb moisture. The 7-step coating process using Kynar 500 and Sherwin Williams WeatherXL protects the finish from fading, chalking, and corrosion for decades. Every panel is backed by a 50-year peeling and flaking warranty and a 20-year fade and chalking warranty. Most homeowners who install SteeLuxe are installing siding for the last time.

Q:Is SteeLuxe steel siding available in Terrytown, Louisiana

A:Yes. SteeLuxe steel siding is available to homeowners in Terrytown, Louisiana and throughout the surrounding New Orleans Metro. SteeLuxe panels are manufactured in New Philadelphia, Ohio and ship to contractors and homeowners across the country. The full line includes 50 solid colors and 22 wood grain patterns including hand hewn log siding with chinking. Contact SteeLuxe directly for availability, pricing, and to find an installer in the Terrytown area.

Q:I live in a FEMA hurricane zone. Will steel siding reduce my insurance premium?

A:Steel siding with Class 4 impact resistance can qualify homeowners for reduced insurance premiums, but whether it does depends on your specific carrier and policy. Terrytown is located in a FEMA designated hurricane-prone region, and some insurers factor both impact resistance ratings and wind performance into their risk assessment for homes in that region. SteeLuxe panels carry Class 4 impact resistance, the highest rating available, and the Slide-Lock panel system provides a continuous mechanical interlock across the full wall. Contact your insurance provider directly to confirm whether Class 4 rated steel siding qualifies for a premium reduction on your Terrytown policy. The performance specifications are real regardless of what your insurer decides to do with them.

Q:Does heat affect the bond between the EPS foam core and the steel face over time?

A:The bond between the EPS foam core and the steel face is engineered to hold through sustained heat exposure. In Terrytown, where summers regularly reach 93 degrees F, exterior surfaces carry a heavy thermal load for months at a time. EPS foam does not soften or deform under the temperatures that exterior siding panels experience in normal installation. The 7-step coating process on the steel face is engineered for UV and high-temperature performance using Kynar 500 and Sherwin Williams WeatherXL. The panel system is built to last 40 to 60 years or more, and that lifespan expectation applies in hot climates. Bond separation from heat is not a documented issue in the SteeLuxe panel construction.

Q:What is the difference between steel siding and vinyl siding?

A:Steel and vinyl are both low-maintenance siding options but they perform very differently over time. Vinyl expands and contracts significantly in temperature extremes and can warp, crack, and fade over 20 to 30 years. Steel does not warp, crack, or fade at the same rate. SteeLuxe uses 26-gauge steel, about 25% thicker than standard 29-gauge steel, bonded to an EPS foam core that adds R-3.57 insulation value. Vinyl has no insulation value on its own. Steel carries a Class A fire rating and Class 4 impact resistance. Vinyl carries neither. The primary advantage of vinyl is lower upfront cost. The primary advantages of steel are lifespan, impact resistance, fire rating, and long-term finish performance.

Areas Near Terrytown We Serve

SteeLuxe ships direct to Terrytown and the surrounding area. We also serve:

Belle Chasse, LA Colfax, LA Gretna, LA Hackberry, LA Iota, LA Lecompte, LA Livonia, LA Loreauville, LA New Sarpy, LA Oil City, LA Pine Prairie, LA Port Vincent, LA Presquille, LA Springfield, LA Timberlane, LA