Steel Siding & Hand Hewn Log Siding in Northglenn, Colorado

Home / Locations / Colorado / Northglenn

Steel Siding Is The Best Solution For The Northglenn, Colorado Area

Homeowners in Northglenn, Colorado thinking about the full lifespan of a steel siding installation are working with two conditions that define the structural case. Winters regularly drop to 16 degrees F, cycling freeze-thaw pressure through the panel face and foam core across every cold season. Hail is a real seasonal factor in the North Denver Metro. Both test the panel for cracking and deformation under impact, along with long-term coating adhesion. SteeLuxe uses 26-gauge steel, approximately 25% thicker than the 29-gauge panels common in this market. Steel does not become brittle in cold. Class 4 impact resistance, the highest available, means the panel face is rated to take a direct hail strike without cracking or losing finish integrity. The EPS foam bonded to the steel face absorbs kinetic energy on impact and does not absorb water, so ice expansion inside the panel cannot occur through cold cycles. Zero organic material in the panel construction means fire has no fuel and this part of Colorado's Moderate-rated termite colonies have no food source in the panel. Wood grain siding, including hand hewn log siding with chinking, runs on the same 26-gauge steel. No organic content means no treatment schedule and nothing to replace from pest or fire exposure across the full lifespan. Two structural stresses, one panel, and a 40 to 60 year lifespan that neither condition will shorten.

SteeLuxee Hand Hewn Log Steel Siding On a Small Cabin Style Home
Request a Free Estimate

The Most Advanced Steel Siding On The Market

Available in 50 Solid Colors and 22 Wood Patterns
SteeLuxe Steel Siding Close Up Graphic
EPS Foam
Class-A Fire Rating
Sound Dampending
R-3.57 Insulation
Premium 7 Step Coating
Heavy Duty 26 Guage Steel
  • 20 Year Fading & Chalking Warranty
  • 50 Year Flaking & Peeling Warranty
  • Lasts 40-60+ Years
  • One Person Installation
SteeLuxe Panel Joint Closeup Graphic
Slide Lock Panel System
SteeLuxe Steel Siding On Roof Support

The Most Advanced Steel Siding in Northglenn

50 Solid Colors & 22 Wood Grain Patterns

SteeLuxe is a family-owned steel siding manufacturer that builds one product and builds it right. Every panel is made from 26-gauge steel, about 25% thicker than the 29-gauge steel that most competitors use. Each panel is bonded to an EPS foam core that adds R-3.57 insulation value, sound dampening, and enough panel rigidity so that one person can carry and install it without help.

The finish on every panel goes through a proprietary 7-step coating process using Kynar 500 for wood grain patterns and Sherwin-Williams WeatherXL for solid colors. These are the top-tier coatings in the metal siding industry. The surface resists fading, chalking, scratching, and corrosion for decades without the need for repainting or resealing.

Northglenn homeowners can choose from 50 solid colors or 22 wood grain patterns. The wood grain options use a 3D printed finish that gives each panel genuine visual depth and a realistic wood appearance with zero wood maintenance. Every profile installs with SteeLuxe’s proprietary Slide-Lock panel system, designed by siding installers with 25 years of field experience. Panels lock together cleanly and consistently, reducing installation time and alignment issues.

SteeLuxe steel siding carries a Class A fire rating and Class 4 impact resistance, the highest ratings available. It is built to last 40 to 60 years or more.

Need help finding an installer?

Find a SteeLuxe dealer near you

The Only Steel Hand-Hewn Log Cabin Siding with Chinking

Available in Northglenn, Colorado

SteeLuxe makes the only steel siding on the market with a true hand-hewn timber profile and an optional standalone chinking panel. If you want the log cabin look on your home, this is the only steel product built to deliver with this level of detail.

Each panel features a realistic 3D printed hand-hewn surface pattern that replicates the irregular axe marks, natural knots, and rugged grain character of authentic pioneer-era log construction. The wood grain patterns are non-repeating, so no two panels look identical. Between each course, a separate steel chinking profile panel is installed to recreate the classic chinked log cabin appearance. The chinking panel is available in four colors — Ash Gray, Charcoal, Clay, and Sandstone Tan,  so Northglenn homeowners can match or contrast it to suit the look they want.

This is not a printed chink line on the face of the siding panel. It is a separate steel panel made from the same 26-gauge steel and 7-step Kynar 500 coating as every other SteeLuxe panel. It will not crack, separate, fade, or require reapplication.

Real hand-hewn wood siding demands re-staining and re-sealing every two to three years, chinking inspection and repair every season, and ongoing insect and rot prevention. SteeLuxe steel hand-hewn siding requires none of that. No staining. No sealing. No chinking repairs. The same 50-year peeling and flaking warranty and 20-year fade and chalking warranty that covers every SteeLuxe panel covers this one, too.

SteeLuxe hand-hewn and chinking siding works on full home re-siding projects, new construction, barndominiums, cabins, vacation rentals, and accent walls. It installs with the same Slide-Lock panel system as every other SteeLuxe profile which is fast, clean, and manageable for one person.

SteeLuxe steel Siding On House

Ready to Transform Your Home With Hand-Hewn Log Cabin Siding?

Get the authentic hand-hewn cabin look with the chinking detail you love,  and never think about maintenance again. SteeLuxe steel siding is insulated, fire-rated, hail-resistant, and built to last a lifetime. See it and feel it for yourself.

Request a Free Estimate

Frequently Asked Questions

Q:Is steel siding worth the cost compared to vinyl or fiber cement?

A:Steel siding costs more upfront than vinyl and is comparable to fiber cement depending on the profile and finish. The value case comes from lifespan and maintenance. Vinyl typically lasts 20 to 30 years and requires periodic cleaning, painting, and panel replacement after impact events. Fiber cement requires repainting every 5 to 7 years and can crack under hail and impact. SteeLuxe steel siding is built to last 40 to 60 years or more with no repainting, no resealing, and no panel replacement after normal weather events. Over a 40-year period the total cost of ownership for steel siding is typically lower than vinyl or fiber cement when maintenance and replacement costs are factored in.

Q:Does steel siding actually look like real wood?

A:SteeLuxe steel siding is available in 22 wood grain patterns using a 3D printed finish that replicates the look of real wood on a flat steel panel. The patterns include options that replicate cedar, barnwood, and hand hewn timber. The hand hewn log siding with chinking option replicates the irregular axe marks and grain character of authentic hand hewn timber with a separate steel chinking panel installed between courses. The finish is printed, not pressed, so the panel surface is flat and consistent. It does not fade, peel, or require the staining and sealing that real wood demands.

Q:How long does steel siding last?

A:SteeLuxe steel siding is built to last 40 to 60 years or more. The 26-gauge steel core does not rot, warp, crack, or absorb moisture. The 7-step coating process using Kynar 500 and Sherwin Williams WeatherXL protects the finish from fading, chalking, and corrosion for decades. Every panel is backed by a 50-year peeling and flaking warranty and a 20-year fade and chalking warranty. Most homeowners who install SteeLuxe are installing siding for the last time.

Q:Is SteeLuxe steel siding available in Northglenn, Colorado

A:Yes. SteeLuxe steel siding is available to homeowners in Northglenn, Colorado and throughout the surrounding North Denver Metro. SteeLuxe panels are manufactured in New Philadelphia, Ohio and ship to contractors and homeowners across the country. The full line includes 50 solid colors and 22 wood grain patterns including hand hewn log siding with chinking. Contact SteeLuxe directly for availability, pricing, and to find an installer in the Northglenn area.

Q:I've seen homes survive wildfires where only non-combustible materials were used. Is siding a factor?

A:Exterior siding is one of the primary ignition points in a wildfire event. Ember contact with combustible siding surfaces is a well-documented ignition pathway, and Northglenn is located in a region rated High wildfire risk by the USDA Forest Service. SteeLuxe panels carry a Class A fire rating and are non-combustible construction through the full panel assembly, including the steel face and EPS foam core. The coating system using Kynar 500 and Sherwin Williams WeatherXL is engineered for high-temperature environments. Switching to non-combustible siding does not make a home fireproof, but it removes a significant ignition risk from the exterior wall in a region where that risk is rated High.

Q:I've seen steel roofing dent from hail. Won't the siding do the same thing?

A:Steel roofing products that dent from hail are thinner gauge panels without an energy-absorbing layer behind the steel face. SteeLuxe siding uses 26-gauge steel, about 25% thicker than the 29-gauge steel many competitors use, bonded to an EPS foam core that absorbs impact energy before it can deform the steel face. Northglenn sits in an area rated 5 out of 5 for hail severity by NOAA, and the panel system carries Class 4 impact resistance, the highest rating available. The combination of thicker gauge steel and EPS foam backing is what separates SteeLuxe from bare metal roofing panels in hail performance. Class 4 rated products can also qualify Northglenn homeowners for reduced insurance premiums. Check with your insurance provider for specifics.

Q:What is the difference between steel siding and vinyl siding?

A:Steel and vinyl are both low-maintenance siding options but they perform very differently over time. Vinyl expands and contracts significantly in temperature extremes and can warp, crack, and fade over 20 to 30 years. Steel does not warp, crack, or fade at the same rate. SteeLuxe uses 26-gauge steel, about 25% thicker than standard 29-gauge steel, bonded to an EPS foam core that adds R-3.57 insulation value. Vinyl has no insulation value on its own. Steel carries a Class A fire rating and Class 4 impact resistance. Vinyl carries neither. The primary advantage of vinyl is lower upfront cost. The primary advantages of steel are lifespan, impact resistance, fire rating, and long-term finish performance.

Areas Near Northglenn We Serve

SteeLuxe ships direct to Northglenn and the surrounding area. We also serve: