Steel Siding & Hand Hewn Log Siding in Santa Monica, California

Home / Locations / California / Santa Monica

Steel Siding Is The Best Solution For The Santa Monica, California Area

Homeowners in Santa Monica, California choosing steel siding are looking for one outcome: no more annual exterior maintenance in a climate that works against other materials on four fronts simultaneously. SteeLuxe is built to deliver that outcome permanently. The 7-step coating system applies Kynar 500 to wood grain siding patterns and Sherwin Williams WeatherXL to solid colors. Both hold color without chalking through sustained Southern California summer heat and hold adhesion in continuous coastal salt air contact. A 50-year peeling and flaking warranty and a 20-year fade and chalking warranty back that performance without requiring any recoating from the homeowner. Panel construction eliminates two additional variables from the maintenance list. Steel and EPS foam carry zero organic material. The USDA rates termite pressure in this part of California at Heavy, and that pressure level meets a panel with no food source anywhere in its construction. That same zero organic material means fire has nothing to combust in the panel at any wildfire risk level. Both the termite resistance and the Class A fire specification are built into the material composition and neither degrades over time. AZ55 Galvalume at every fastener point manages the salt air corrosion dimension without any homeowner intervention. The 22 wood grain siding patterns and hand hewn log siding with chinking are available on that Class A rated panel. In the coastal chaparral terrain of Southern California, warm natural wood tones carry no combustibility trade-off and no organic substrate for the year-round termite pressure of this climate to work against. Across four conditions that drive upkeep on other materials here, the answer to every one of them is already built into the panel.

SteeLuxee Hand Hewn Log Steel Siding On a Small Cabin Style Home
Request a Free Estimate

The Most Advanced Steel Siding On The Market

Available in 50 Solid Colors and 22 Wood Patterns
SteeLuxe Steel Siding Close Up Graphic
EPS Foam
Class-A Fire Rating
Sound Dampending
R-3.57 Insulation
Premium 7 Step Coating
Heavy Duty 26 Guage Steel
  • 20 Year Fading & Chalking Warranty
  • 50 Year Flaking & Peeling Warranty
  • Lasts 40-60+ Years
  • One Person Installation
SteeLuxe Panel Joint Closeup Graphic
Slide Lock Panel System
SteeLuxe Steel Siding On Roof Support

The Most Advanced Steel Siding in Santa Monica

50 Solid Colors & 22 Wood Grain Patterns

SteeLuxe is a family-owned steel siding manufacturer that builds one product and builds it right. Every panel is made from 26-gauge steel, about 25% thicker than the 29-gauge steel that most competitors use. Each panel is bonded to an EPS foam core that adds R-3.57 insulation value, sound dampening, and enough panel rigidity so that one person can carry and install it without help.

The finish on every panel goes through a proprietary 7-step coating process using Kynar 500 for wood grain patterns and Sherwin-Williams WeatherXL for solid colors. These are the top-tier coatings in the metal siding industry. The surface resists fading, chalking, scratching, and corrosion for decades without the need for repainting or resealing.

Santa Monica homeowners can choose from 50 solid colors or 22 wood grain patterns. The wood grain options use a 3D printed finish that gives each panel genuine visual depth and a realistic wood appearance with zero wood maintenance. Every profile installs with SteeLuxe’s proprietary Slide-Lock panel system, designed by siding installers with 25 years of field experience. Panels lock together cleanly and consistently, reducing installation time and alignment issues.

SteeLuxe steel siding carries a Class A fire rating and Class 4 impact resistance, the highest ratings available. It is built to last 40 to 60 years or more.

Need help finding an installer?

Find a SteeLuxe dealer near you

The Only Steel Hand-Hewn Log Cabin Siding with Chinking

Available in Santa Monica, California

SteeLuxe makes the only steel siding on the market with a true hand-hewn timber profile and an optional standalone chinking panel. If you want the log cabin look on your home, this is the only steel product built to deliver with this level of detail.

Each panel features a realistic 3D printed hand-hewn surface pattern that replicates the irregular axe marks, natural knots, and rugged grain character of authentic pioneer-era log construction. The wood grain patterns are non-repeating, so no two panels look identical. Between each course, a separate steel chinking profile panel is installed to recreate the classic chinked log cabin appearance. The chinking panel is available in four colors — Ash Gray, Charcoal, Clay, and Sandstone Tan,  so Santa Monica homeowners can match or contrast it to suit the look they want.

This is not a printed chink line on the face of the siding panel. It is a separate steel panel made from the same 26-gauge steel and 7-step Kynar 500 coating as every other SteeLuxe panel. It will not crack, separate, fade, or require reapplication.

Real hand-hewn wood siding demands re-staining and re-sealing every two to three years, chinking inspection and repair every season, and ongoing insect and rot prevention. SteeLuxe steel hand-hewn siding requires none of that. No staining. No sealing. No chinking repairs. The same 50-year peeling and flaking warranty and 20-year fade and chalking warranty that covers every SteeLuxe panel covers this one, too.

SteeLuxe hand-hewn and chinking siding works on full home re-siding projects, new construction, barndominiums, cabins, vacation rentals, and accent walls. It installs with the same Slide-Lock panel system as every other SteeLuxe profile which is fast, clean, and manageable for one person.

SteeLuxe steel Siding On House

Ready to Transform Your Home With Hand-Hewn Log Cabin Siding?

Get the authentic hand-hewn cabin look with the chinking detail you love,  and never think about maintenance again. SteeLuxe steel siding is insulated, fire-rated, hail-resistant, and built to last a lifetime. See it and feel it for yourself.

Request a Free Estimate

Frequently Asked Questions

Q:Is steel siding worth the cost compared to vinyl or fiber cement?

A:Steel siding costs more upfront than vinyl and is comparable to fiber cement depending on the profile and finish. The value case comes from lifespan and maintenance. Vinyl typically lasts 20 to 30 years and requires periodic cleaning, painting, and panel replacement after impact events. Fiber cement requires repainting every 5 to 7 years and can crack under hail and impact. SteeLuxe steel siding is built to last 40 to 60 years or more with no repainting, no resealing, and no panel replacement after normal weather events. Over a 40-year period the total cost of ownership for steel siding is typically lower than vinyl or fiber cement when maintenance and replacement costs are factored in.

Q:Does steel siding actually look like real wood?

A:SteeLuxe steel siding is available in 22 wood grain patterns using a 3D printed finish that replicates the look of real wood on a flat steel panel. The patterns include options that replicate cedar, barnwood, and hand hewn timber. The hand hewn log siding with chinking option replicates the irregular axe marks and grain character of authentic hand hewn timber with a separate steel chinking panel installed between courses. The finish is printed, not pressed, so the panel surface is flat and consistent. It does not fade, peel, or require the staining and sealing that real wood demands.

Q:How long does steel siding last?

A:SteeLuxe steel siding is built to last 40 to 60 years or more. The 26-gauge steel core does not rot, warp, crack, or absorb moisture. The 7-step coating process using Kynar 500 and Sherwin Williams WeatherXL protects the finish from fading, chalking, and corrosion for decades. Every panel is backed by a 50-year peeling and flaking warranty and a 20-year fade and chalking warranty. Most homeowners who install SteeLuxe are installing siding for the last time.

Q:Is SteeLuxe steel siding available in Santa Monica, California

A:Yes. SteeLuxe steel siding is available to homeowners in Santa Monica, California and throughout the surrounding Los Angeles Westside. SteeLuxe panels are manufactured in New Philadelphia, Ohio and ship to contractors and homeowners across the country. The full line includes 50 solid colors and 22 wood grain patterns including hand hewn log siding with chinking. Contact SteeLuxe directly for availability, pricing, and to find an installer in the Santa Monica area.

Q:We get salt fog, not just salt air. Is there a difference for coating performance?

A:Salt fog is a more concentrated and persistent form of salt exposure than standard salt air, and it puts a heavier demand on coating systems. SteeLuxe panels start with an AZ55 Galvalume base coat, an aluminum-zinc alloy engineered for corrosion resistance in exactly that kind of sustained coastal exposure. That base coat runs through the full panel construction and is the primary defense at every surface including cut edges. The Kynar 500 and Sherwin Williams WeatherXL topcoats are applied through a 7-step process over that Galvalume base. Salt fog is a real condition for Santa Monica homeowners, and the same Galvalume technology that protects commercial and industrial coastal structures is what sits underneath every SteeLuxe panel finish.

Q:Can I still get wood grain patterns on a home in a wildfire risk zone?

A:Wood grain patterns on a non-combustible steel panel are fully available to Santa Monica homeowners in a High wildfire risk zone. SteeLuxe offers 22 wood grain patterns using a 3D printed finish that replicates the look of real wood on a flat steel panel. Every panel in the wood grain line carries a Class A fire rating and is non-combustible construction. The hand hewn log siding with chinking option delivers the most detailed wood and timber aesthetic in the line, with a separate steel chinking profile installed between courses in four colors: Ash Gray, Charcoal, Clay, or Sandstone Tan. Wildfire restrictions that require non-combustible materials do not rule out the wood look. Non-combustible steel satisfies those requirements while delivering the full visual range of the wood grain line.

Q:What is the difference between steel siding and vinyl siding?

A:Steel and vinyl are both low-maintenance siding options but they perform very differently over time. Vinyl expands and contracts significantly in temperature extremes and can warp, crack, and fade over 20 to 30 years. Steel does not warp, crack, or fade at the same rate. SteeLuxe uses 26-gauge steel, about 25% thicker than standard 29-gauge steel, bonded to an EPS foam core that adds R-3.57 insulation value. Vinyl has no insulation value on its own. Steel carries a Class A fire rating and Class 4 impact resistance. Vinyl carries neither. The primary advantage of vinyl is lower upfront cost. The primary advantages of steel are lifespan, impact resistance, fire rating, and long-term finish performance.

Areas Near Santa Monica We Serve

SteeLuxe ships direct to Santa Monica and the surrounding area. We also serve:

Marina del Rey, CA